How to Prep Your Walls for Velvet Paint
How to Prep Your Walls for Velvet Paint
Good preparation is the foundation of a beautiful velvet finish. Because velvet paint has a soft sheen that catches light, any imperfections in the wall surface will be more visible than with flat paint. Taking time to prep properly makes a significant difference in the final result.
Step-by-Step Wall Prep
- Clean the walls โ wipe down with a damp cloth to remove dust, grease, and grime. Allow to dry completely.
- Fill holes and cracks โ use spackling compound to fill any nail holes, dents, or cracks. Allow to dry and sand smooth.
- Sand rough areas โ lightly sand any uneven patches or old paint drips. Wipe away dust with a tack cloth.
- Tape off edges โ apply painter's tape along trim, ceilings, and corners for clean lines.
- Prime if needed โ if painting over a dark color or bare drywall, apply a coat of primer and allow to dry fully before starting.
- Apply your base coat โ roll on one full coat of eggshell or satin paint in your chosen color and allow to dry completely before applying Wall FX Velvet.
Why Prep Matters More for Velvet
The soft sheen of velvet paint reflects light in a way that flat paint does not. This means surface imperfections โ bumps, ridges, or uneven patches โ can become more noticeable once the finish is applied. A smooth, clean wall surface ensures your velvet finish looks its absolute best.